GIANA GGTRONIC 2000 TRIPLE X 960 x 12000 CNC TURNING & MILLING LATHE

With Siemens 840 D. Manufactured New December 2008

 

 

 

 

 

(Detailed Specifications can be found in the 'Word' document below)

 

Faceplate dia. 1.800 mm.
Please observe the third carriage for internal turning with a boring bar to a depth of 1900 mm.
With the machine is two steadies 100 to 900 mm diameter carrying 20 Tons each.
 
The GIANA can machine cylinders and complex components up to 1.800 mm in diameter and 12,000 mm in length.
The machine is a high-powered turning and milling lathe, particularly suited to heavy-duty machining in the precision mechanics sector, to the machining of ship masts, engine cylinder turning, milling and deep boring operation, wind turbine masts, wind turbine shafts, turbine

shafts, oil pipeline valves, crankshafts and rolls, to the machining of large winch drums, etc.

 

 

The machine ergonomic features, as well as ease of clamping, tool visibility throughout the various stages of machining, and the different measurements once the part has been finished.

The longitudinal axis (Z axis) uses INA RUE 100 linear roller guide ways, high stiffness guide ways, and sliding on preloaded roller guide shoes. The X and Y axes slide on preloaded roller guide shoes.

With a B-axis machine, parts can be machined both on 5 sides, in a single setup, or by using all 5 axes to machine any complex profile.
Positioning precision ± 0.01 and repeatability ± 0.005 mm.
The machine structure, built entirely of cast iron, is strong enough to take anti-vibration boring bars, suitable for internal boring to a depth of over 4,000 mm.