Equipped With:
- Siemens Sinumerik 840 D CNC Control
- Hydrostatic guideways in X & Y Axes
- Telescopic cover for bed (X-Axis)
- Cumulated Z & W Axes
- Platform (Y-Axis)
Technical Specifications:
Boring/milling spindle diameter………………………………..203.2/335 mm 8”/13.19”
Taper of spindle………………………………………………….ISO 60 ISO 60
Section of ram……………………………………………………530 x 600 mm 20.87” x 23.62”
Travels:
X-axis (horizontal)……………………………………………….9000 mm 354.33”
Y-axis (vertical)…………………………………………………..4000 mm 157.48”
Z-axis (boring spindle)…………………………………………..1200 mm 47.24”
W- axis (ram)……………………………………………………..800 mm 31.50”
Z + W cumulated................................................................................2000 mm 78.74”
Main spindle revolutions (2 steps)…………………………….1 – 350 / 5 – 1200 rpm
Travel data:
Feed of X-axis……………………………………………………1 – 8000 mm/min.
Feed of Y-axis……………………………………………………1 – 6000 mm/min.
Feeds of Z / W-axis………………………………………………1 – 4000 mm/min.
Rapid feed of X-axis…………………………………………….8000 mm/min.
Rapid feed of Y-axis…………………………………………….6000 mm/min.
Rapid feed of Z / W-axis………………………………………...4000 mm/min.
Electrical Power:
Main motor……………………………………………………………….….75 kW
Motor torque X / Y-axis each………………………………….......................70 Nm
Motor torque Z / W-axis each……………………………………………....40 Nm
Nominal power requirement when 380 V +/- 10%, 50 Hz +/- 2%..............165 KW
Peak power requirement……………………………………………………215 KW
Total weight approx…………………………………………………………130 t
Overall size without electric and hydraulic equipment…………………..16500 x 5500 x 8100 mm 649.61” x 216.54” x 318.90”
